1. Check the equipment electrical device carefully before booting. The protection device in the switch control box is intact, and no debris shall be placed in the box. The fabric inspection machine must have good work lighting, and the cloth test machine code is smooth and intact.
2. The fabric inspection machine is a chain transmission, and the multi -car Kunye operation must ensure that the safety cover of the chain transmission part is complete, firm and reliable.
3. There must be no sharp sharp weapons on the fabric test machine to prevent damage to the person or damage the machine.
4. It takes a few weeks before turning, and there is no abnormal noise for inspection. After no card, no card or clip phenomenon, you can drive it.
5. During the running machine, it is strictly forbidden to replace the cloth roll or use a stick to play with the roll to prevent accidents from causing the machine to cause accidents.
6. The replacement of the cloth roll should be performed after the spoke shaft is completely stopped.
7. Do a good job of daily maintenance, often check the heating of the bearing of the machine, and replace it if necessary. Come on the bearings once a week, do maintenance work at least once a month, and wash the transmission chain once a quarter.
8. During the operation of the abnormal situation, turn off the car immediately. After the maintenance personnel are inspected and repaired, you can drive again.
9. After get off work, cut off the power, clean around the cloth test machine, and there is no debris on the ground.
2. The fabric inspection machine is a chain transmission, and the multi -car Kunye operation must ensure that the safety cover of the chain transmission part is complete, firm and reliable.
3. There must be no sharp sharp weapons on the fabric test machine to prevent damage to the person or damage the machine.
4. It takes a few weeks before turning, and there is no abnormal noise for inspection. After no card, no card or clip phenomenon, you can drive it.
5. During the running machine, it is strictly forbidden to replace the cloth roll or use a stick to play with the roll to prevent accidents from causing the machine to cause accidents.
6. The replacement of the cloth roll should be performed after the spoke shaft is completely stopped.
7. Do a good job of daily maintenance, often check the heating of the bearing of the machine, and replace it if necessary. Come on the bearings once a week, do maintenance work at least once a month, and wash the transmission chain once a quarter.
8. During the operation of the abnormal situation, turn off the car immediately. After the maintenance personnel are inspected and repaired, you can drive again.
9. After get off work, cut off the power, clean around the cloth test machine, and there is no debris on the ground.
