The rolling machine is used for various fabrics, non-woven fabrics, foam, leather, paper, reflective materials, acetate fabrics, reinforcing tapes, conductive fabrics and other materials to be rolled and packaged and repeated before cutting and baling of various fabrics. Roll, can be rolled into straight or 45 degree twill fabric, photoelectric edge-to-edge, can be used for thick and thin materials, can be effectively aligned and automatically controlled, and the machine can set the length of the roll. The cloth rolling machine adopts electronic edge-aligning equipment, so that after the cloth and other materials are coiled, the cloth margins are uniform, and the soft roll or hard roll can be selected according to the type of cloth. , And actively control, the rolling speed can be adjusted steplessly, the production efficiency is high, manpower saving, and single-person operation is convenient. The twill roll cloth can be adjusted between 20 degrees and 70 degrees. The stainless steel cloth bucket is used, which will never rust and avoid contamination of the cloth. The machine and the automatic cutting and baling machine are a set of equipment.
The cloth winding machine should be operated by designated personnel, and non-operators shall not use it without permission. Before operation, turn on the power switch and let the cloth rolling machine rotate one or two circles to check whether the machine is normal. It is forbidden to place metal objects and other sundries on and around the rolling machine to avoid affecting the rolling effect. Operators should do daily maintenance and hygiene, and use neutral detergents when cleaning the conveyor belt. If any abnormality is found during operation, the vehicle should be shut down immediately and the maintenance personnel should be notified for inspection. After get off work, cut off the power and do a good job in cleaning up
The cloth winding machine should be operated by designated personnel, and non-operators shall not use it without permission. Before operation, turn on the power switch and let the cloth rolling machine rotate one or two circles to check whether the machine is normal. It is forbidden to place metal objects and other sundries on and around the rolling machine to avoid affecting the rolling effect. Operators should do daily maintenance and hygiene, and use neutral detergents when cleaning the conveyor belt. If any abnormality is found during operation, the vehicle should be shut down immediately and the maintenance personnel should be notified for inspection. After get off work, cut off the power and do a good job in cleaning up
